Founded in 2014, VOOPOO is one of the well-known brands in the e-cigarette industry, focusing on innovative and high-quality vapor equipment. Committed to the technological innovation of vaping chips, the pursuit of product quality and technical research. The vape product of the VOOPOO Drag series is the best proof. Vapeciga online vape shop sells VOOPOO related e-cigarette products and other brands of e-cigarette products. Free shipping, original authentic, quality assurance.
Look back upon 2020, Voopoo has made a lot of innovations. Such as Voopoo Drag X Mod Pod Kit, Voopoo Argus GT Kit, etc. Without a doubt, those great devices have inspired the whole market to put its focus on the vape devices themselves rather than hypes and propaganda. A good product will prove for itself. And the Voopoo Drag 3 will do the same.
The VOOPOO Drag 3 177W Mod Kit is the third high explosive and playable super Mod Kit after Drag 1 and Drag 2. VOOPOO Drag 3 Mod Kit supports a variety of compatible modes, and equipped with the newly launched TPP atomization platform. VOOPOO Drag 3 Kit consists of Drag 3 Mod and TPP (Tank Pod Push) Tank. VOOPOO Drag 3 Mod adopts the advanced GENE.FAN 2.0 chipset, it provides strong explosive power, stable output and rich intelligent functions. The upgraded GENE.FAN 2.0 chip can generate 177W of power by dual 18650 batteries, which can make full use of the TPP coils to provide unprecedented flavor and experience.
It is also compatible with any 510 atomizers through the top 510 Connector. Drag 3 Mod supports Super/Smart/RBA/TC modes to satisfy beginners and professional players. The new TPP atomizer is designed with "Aerodynamic Simulation" and "Two-way Convection" airway structure to fully maximize the atomization efficiency. It is a low-cost, universal atomizer system. TPP Tank holds 5.5ml capacity, adopts bottom filling. The magnetic suction pod provides simple and sanitary way of filling oil. It is compatible with all TPP coils.
As the third generation of Voopoo's main product line, the Voopoo Drag 3 Kit has derived a lot of well-received features from those sought-after Voopoo products in 2020. Judging by the outside, there's a lot of similarities between Drag 3 and Drag Max. The whole chassis construction structure design inherited from Drag Max directly which has still adopted the implementation of zinc alloy and a tactile leather section to ensure comfort. And using a lot of lines and angles to outline the strength of the overall construction.
On the aspect of functionalities, the Voopoo Drag 3 still supports three switchable output modes including Smart Mode(Intelligent wattage match), RBA Mode(Wattage unlimited), and a Temperature Control Mode to cover all basic vaping needs. And the operation panel( Screen and adjustment buttons) still smells the same as all Voopoo devices. Most importantly, Voopoo Drag 3 is a fairly well-behaved 510 connection box mod. I think the lack of 510 connection is the main reason that drives intentional consumers away from the previous Voopoo Drag Max Kit.
But what differs the brand-new Drag 3 from the previous Drag Max is the new one is a 510 connection box mod device, which is the same as Voopoo Argus GT Kit. It's just because of this configuration that has empowered the Drag 3 to have a great capacity to use 510 threaded atomizers. If you're not satisfied with the flavor and vapor production that the new TPP system gives you, you can just switch to your very own tanks and rebuildable atomizers with ease. (You can just stop here if you don't want more details about the TPP system.)
There's no need to dwell on the outside too much because the pictures above will tell every detail in detail. Let's move to the inside of this device.
The user modes include:
- Smart – this automatically selects the correct output for the coil installed
- RBA – this gives you full variable wattage output control
- Super – when you want to go higher than 81W in RBA mode the Super Burst mode automatically kicks in.
The VooPoo Drag Max kit is the latest addition to the VooPoo drag line up. It features the Drag Max gene fan 2.0 chipset and it is fueled by 2 high-amp 18650 batteries the Drag Max suits both MTL and DTL vaping styles. The pod mod is visibly striking, constructed of zinc alloy with a flashy decorative leather panel. Its sturdy design feels comfortable in hand and showcases a great build quality.
Let’s begin with the con’s which are short and sweet, tried a true vaper Mike Vapes expressed his concerns with the Drag Max pod mod, he said If the chipset sits for 20 minutes or half an hour, you have to double press the firing button to vape, also you have to constantly press the up and down buttons, it locks the entire device. Another con noted was that you can’t attach a 510 base attachment to the device. Finally, one vaper said that the tank had leakage but that wasn’t a real concern from other vapers.
Outside of that, the VooPoo Drag 3 was well received and filled with pros from its build quality down to its performance. The build quality is perfect, it has a nice cushion feeling to it, also the display screen is easy to navigate. The mouthpiece is not too small, and it fits comfortably in your mouth.
It vapes like a dream with a super-fast response thanks to the upgraded gene chipset. The device wicks efficiently, the PNP coils are terrific, it vapes like a sub-ohm tank and it gives a nice warm saturated vape with adjustable airflow. Both the flavor and vapor production are outstanding. The 0.15ohm coil delivers beautiful flavor, it's all that you can ask for.
The VooPoo Drag 3 is an impressive pod mod. it offers a terrific performance with room for some improvements. It’s great for any level of vaper, the DIY RBA touch is nice for more advanced level vapers. It’s a great investment if you're looking for an introduction to sub-ohm vaping. I’d recommend it!